Reclaiming Copper Resource from Copper Slag: Beneficiation Test Research and Production Practice
LUO Chunhua1,2, SU Xiaohui1, LU Bingang1, PU Yinchun1, LIANG Jinrong1
1.National Key Laboratory of Nickel & Cobalt Associated Minerals Resources Development and Comprehensive Utilization, Jinchang 737100, Gansu, China;
2.Jinchuan Nickel Cobalt Research & Design Institute, Jinchang 737100, Gansu, China
Abstract:A process mineralogy study and mineral processing tests were conducted for a copper slag with Cu grade of 0.81%, and a beneficiation flowsheet for recovering copper resource and its technical parameters were determined. With Z-200 and 2# oil respectively as collector and frother, the slag was processed after being milled to a fineness of -0.038 mm85%, and a high-grade copper concentrate with Cu grade of 26.40% was collected by fast preferential floatation, while a low-grade copper concentrate with Cu grade of 3.58% was obtained from a subsequent flotation process consisting of one stage of roughing, two stages of scavenging and two stages of cleaning, resulting in the total copper concentrate grading 13.03% Cu at 76.47% recovery. This copper-recovering technique has been successfully applied in commercial practice, showing that the comprehensive utilization of Cu metal resource in a copper slag can be actualized.
罗春华, 苏晓晖, 陆斌刚, 蒲银春, 梁金荣. 某堆存铜渣中回收铜金属的选矿试验研究及生产应用[J]. 矿冶工程, 2024, 44(1): 81-83.
LUO Chunhua, SU Xiaohui, LU Bingang, PU Yinchun, LIANG Jinrong. Reclaiming Copper Resource from Copper Slag: Beneficiation Test Research and Production Practice. Mining and Metallurgical Engineering, 2024, 44(1): 81-83.