Effects of Aging Treatment on Microstructure and Properties of Al-Zn-Mg-Cu Extruded Bar
GAO Jingjing1, LI Xujian1, FU Jianjian1, ZHOU Yubao1, MA Yong1, HUANG Qingmei2, YANG Xianwen2, YE Lingying2
1.Henan Key Laboratory of Fastening Connection Technology, Xinyang 464000, Henan, China;
2.School of Material Science and Engineering, Central South University, Changsha 410083, Hunan, China
Abstract:The effects of aging treatment on the microstructure and properties of Al-Zn-Mg-Cu extruded bars were investigated. The results show that the alloys treated by two-stage aging and re-aging (TSR), retroregression and re-aging (RRA), and non-isothermal aging (NIA), compared to the treatment with T73, all present better intergranular corrosion (IGC) resistance, with the maximum corrosion depth down from 70 μm to 19, 48, and 30 μm, respectively. Compared to those treated by RRA and NIA, the TSR-treated alloy has the similar tensile strength and yield strength, but obviously superior IGC. After the treatment of T73, TSR, RRA, and NIA, the alloy has its grain boundary precipitates with average size of 27.7, 39.2, 31.6, and 25.5 nm, respectively, and matrix precipitates with average size of 8.1, 10.2, 10.9, and 11.0 nm, respectively.
高靖靖, 李旭健, 付建建, 周玉宝, 马勇, 黄青梅, 杨献文, 叶凌英. 时效工艺对Al-Zn-Mg-Cu挤压棒材组织和性能的影响[J]. 矿冶工程, 2024, 44(1): 147-151.
GAO Jingjing, LI Xujian, FU Jianjian, ZHOU Yubao, MA Yong, HUANG Qingmei, YANG Xianwen, YE Lingying. Effects of Aging Treatment on Microstructure and Properties of Al-Zn-Mg-Cu Extruded Bar. Mining and Metallurgical Engineering, 2024, 44(1): 147-151.
[1] KE B, YE L Y, ZHANG Y, et al. Enhanced mechanical properties and corrosion resistance of an Al-Zn-Mg aluminum alloy through variable-rate non-isothermal aging[J]. Journal of Alloys and Compounds, 2022,890:161933.
[2] 贺春花,李红萍,叶凌英,等. 晶粒组织对7150铝合金抗腐蚀性能的影响[J]. 材料导报, 2021,35(22):22109-22114.
[3] 王鹏宇,叶凌英,柯 彬,等. 晶粒组织对Al-Zn-Mg合金力学性能和腐蚀性能的影响[J]. 材料导报, 2023(19):1-16.
[4] KE B, YE L Y, TANG J G, et al. Hot deformation behavior and 3D processing maps of AA7020 aluminum alloy[J]. Journal of Alloys and Compounds, 2020,845:156113.
[5] XU W F, LU H J, LUO Y X, et al. Microstructure evolution and stress corrosion cracking sensitivity of friction stir welded high strength AA7085 joint[J]. Materials & Design, 2021,212:110297.
[6] Knight S, Pohl K, Holroyd N, et al. Some effects of alloy composition on stress corrosion cracking in Al-Zn-Mg-Cu alloys[J]. Corrosion Science, 2015,98:50-62.
[7] Rao A U, Vasu V, Govindaraju M, et al. Stress corrosion cracking behaviour of 7xxx aluminum alloys: Aliterature review[J]. Transactions of Nonferrous Metals Society of China, 2016,26(6):1447-1471.
[8] Nicolas M, Deschamps A. Characterisation and modelling of precipitate evolution in an Al-Zn-Mg alloy during non-isothermal heat treatments[J]. Acta Materialia, 2003,51(20):6077-6094.
[9] SUN X Y, ZHANG B, LIN H J, et al. Correlations between stress corrosion cracking susceptibility and grain boundary microstructures for an Al-Zn-Mg alloy[J]. Corrosion Science, 2013,77:103-112.
[10] 黄青梅,程全士,叶凌英,等. 强化固溶对紧固件用Al-Zn-Mg-Cu合金组织与性能的影响[J]. 中国有色金属学报, 2021,31(9):2390-2402.
[11] YUAN D L, CHEN K H, CHEN S Y, et al. Effect of pre-strain and quench rate on stress corrosion cracking resistance of a low-Cu containing Al-Zn-Mg-Cu alloy[J]. Materials Science and Engineering: A, 2022,833:142374.
[12] Kayani S H, Park S, Euh K, et al. Dislocation-aided electrochemical behavior of precipitates in stress corrosion cracking of Al-Zn-Mg-Cu alloys[J]. Materials Characterization, 2022,190:112019.
[13] Ralston K, Birbilis N, Davies C. Revealing the relationship between grain size and corrosion rate of metals[J]. Scripta Materialia, 2010,63(12):1201-1204.